pure ftpd (antiguo)

sysop
Site Admin
Mensajes: 24
Registrado: Jue Ago 01, 2019 4:24 pm

pure ftpd (antiguo)

Mensaje por sysop »

Con este ftp nada convencional no incluido por ninguna distro (o eso creo), podras,
poner cuotas, acceso web, ratio, control de ancho de banda, gestion independiente
de usuarios, el ftp para todas las prestaciones que necesite un adminstrador de systemas

hay mas prestaciones de las comentadas

lo puedes bajar de aki

http://www.pureftpd.org/project/pure-ftpd/download


configuracion recomendada hay que leer el manual

#./configure --with-brokenrealpath --with-cookie --with-puredb --with-altlog --with-diraliases --with-ftpwho --with-language=spanish --with-largefile --with-paranoidmsg --with-throttling --with-virtualchroot --with-quotas --with-ratios --with-peruserlimit --with-welcomemsg --with-brokenrealpath --without-inetd --without-shadow

#make; make install

copio el programa de lanzamiento del servicio

# cp contrib/*.init -----> /etc/init.d/pure

Generador de config en arranque

# cp configurationfile/pure-config.pl ----> /usr/local/sbin/*


y para crear usarios usad:

Código: Seleccionar todo

pure-pw useradd <login> [-f <passwd file>] -u <uid> [-g <gid>]
                -D/-d <home directory> [-c <gecos>]
                [-t <download bandwidth>] [-T <upload bandwidth>]
                [-n <max number of files>] [-N <max Mbytes>]
                [-q <upload ratio>] [-Q <download ratio>]
                [-r <allow client host>[/<mask>][,<allow client host>[/<mask>]]...]
                [-R <deny client host>[/<mask>][,<deny client host>[/<mask>]]...]
                [-i <allow local host>[/<mask>][,<allow client host>[/<mask>]]...]
                [-I <deny local host>[/<mask>][,<deny local host>[/<mask>]]...]
                [-y <max number of concurrent sessions>]
                [-z <hhmm>-<hhmm>] [-m]



#pure-pw mkdb            hace la base de datos

#pure-pw help     ayuda

[b]recomendado leerse el manual[/b]

configuracion pure-ftpd-conf


#cp /configurationfile/pure-ftp.config ----->/etc/*



si no lo quereis configurar a vuestro gusto
aki teneis un buen ejemplo

Código: Seleccionar todo




    ############################################################
    #                                                          #
    #         Configuration file for pure-ftpd wrappers        #
    #                                                          #
    ############################################################

    # If you want to run Pure-FTPd with this configuration   
    # instead of command-line options, please run the
    # following command :
    #
    # /usr/local/sbin/pure-config.pl /usr/local/etc/pure-ftpd.conf
    #
    # Please don't forget to have a look at documentation at
    # http://www.pureftpd.org/documentation.shtml for a complete list of
    # options.

    # Cage in every user in his home directory

    ChrootEveryone              yes



    # If the previous option is set to "no", members of the following group
    # won't be caged. Others will be. If you don't want chroot()ing anyone,
    # just comment out ChrootEveryone and TrustedGID.
    # minimo GID

    TrustedGID                    100



    # Turn on compatibility hacks for broken clients

    BrokenClientsCompatibility  yes



    # Maximum number of simultaneous users

    MaxClientsNumber            5



    # Fork in background

    Daemonize                   yes



    # Maximum number of sim clients with the same IP address

    MaxClientsPerIP             2



    # If you want to log all client commands, set this to "yes".
    # This directive can be duplicated to also log server responses.

    VerboseLog                  no



    # List dot-files even when the client doesn't send "-a".

    DisplayDotFiles             no



    # Don't allow authenticated users - have a public anonymous FTP only.

    AnonymousOnly               no



    # Disallow anonymous connections. Only allow authenticated users.

    NoAnonymous                 yes



    # Syslog facility (auth, authpriv, daemon, ftp, security, user, local*)
    # The default facility is "ftp". "none" disables logging.

    SyslogFacility              ftp



    # Display fortune cookies

    FortunesFile                      /usr/azaf/tags



    # Don't resolve host names in log files. Logs are less verbose, but
    # it uses less bandwidth. Set this to "yes" on very busy servers or
    # if you don't have a working DNS.

    DontResolve                 yes



    # Maximum idle time in minutes (default = 15 minutes)

    MaxIdleTime                 3



    # LDAP configuration file (see README.LDAP)

    # LDAPConfigFile                /etc/pureftpd-ldap.conf



    # MySQL configuration file (see README.MySQL)

    # MySQLConfigFile               /etc/pureftpd-mysql.conf


    # Postgres configuration file (see README.PGSQL)

    # PGSQLConfigFile               /etc/pureftpd-pgsql.conf


    # PureDB user database (see README.Virtual-Users)

    PureDB                        /etc/pureftpd.pdb


    # Path to pure-authd socket (see README.Authentication-Modules)

    # ExtAuth                       /var/run/ftpd.sock



    # If you want to enable PAM authentication, uncomment the following line

    #PAMAuthentication             yes



    # If you want simple Unix (/etc/passwd) authentication, uncomment this

    # UnixAuthentication            yes



    # Please note that LDAPConfigFile, MySQLConfigFile, PAMAuthentication and
    # UnixAuthentication can be used only once, but they can be combined
    # together. For instance, if you use MySQLConfigFile, then UnixAuthentication,
    # the SQL server will be asked. If the SQL authentication fails because the
    # user wasn't found, another try # will be done with /etc/passwd and
    # /etc/shadow. If the SQL authentication fails because the password was wrong,
    # the authentication chain stops here. Authentication methods are chained in
    # the order they are given.



    # 'ls' recursion limits. The first argument is the maximum number of
    # files to be displayed. The second one is the max subdirectories depth

    LimitRecursion              2000 8



    # Are anonymous users allowed to create new directories ?

    AnonymousCanCreateDirs      no



    # If the system is more loaded than the following value,
    # anonymous users aren't allowed to download.

    MaxLoad                     4



    # Port range for passive connections replies. - for firewalling.

    PassivePortRange          4000 50000



    # Force an IP address in PASV/EPSV/SPSV replies. - for NAT.
    # Symbolic host names are also accepted for gateways with dynamic IP
    # addresses.

    #ForcePassiveIP belchi.org                 


    # Upload/download ratio for anonymous users.

    # AnonymousRatio                1 10



    # Upload/download ratio for all users.
    # This directive superscedes the previous one.

    # UserRatio                 1 10



    # Disallow downloading of files owned by "ftp", ie.
    # files that were uploaded but not validated by a local admin.

    AntiWarez                   yes



    # IP address/port to listen to (default=all IP and port 21).

    Bind                        127.0.0.1,21



    # Maximum bandwidth for anonymous users in KB/s

    # AnonymousBandwidth        8



    # Maximum bandwidth for *all* users (including anonymous) in KB/s
    # Use AnonymousBandwidth *or* UserBandwidth, both makes no sense.

    #UserBandwidth             :10



    # File creation mask. <umask for files>:<umask for dirs> .
    # 177:077 if you feel paranoid.

    Umask                       133:022



    # Minimum UID for an authenticated user to log in.

    MinUID                      499



    # Allow FXP transfers for authenticated users.

    # AllowUserFXP                no



    # Allow anonymous FXP for anonymous and non-anonymous users.

    # AllowAnonymousFXP           no



    # Users can't delete/write files beginning with a dot ('.')
    # even if they own them. If TrustedGID is enabled, this group
    # will have access to dot-files, though.

    ProhibitDotFilesWrite       yes



    # Prohibit *reading* of files beginning with a dot (.history, .ssh...)

    ProhibitDotFilesRead        yes



    # Never overwrite files. When a file whoose name already exist is uploaded,
    # it get automatically renamed to file.1, file.2, file.3, ...

    AutoRename                  yes



    # Disallow anonymous users to upload new files (no = upload is allowed)

    AnonymousCantUpload         no



    # Only connections to this specific IP address are allowed to be
    # non-anonymous. You can use this directive to open several public IPs for
    # anonymous FTP, and keep a private firewalled IP for remote administration.
    # You can also only allow a non-routable local IP (like 10.x.x.x) to
    # authenticate, and keep a public anon-only FTP server on another IP.

    #TrustedIP                  10.1.1.1



    # If you want to add the PID to every logged line, uncomment the following
    # line.

    #LogPID                     yes



    # Create an additional log file with transfers logged in a Apache-like format :
    # fw.c9x.org - jedi [13/Dec/1975:19:36:39] "GET /ftp/linux.tar.bz2" 200 21809338
    # This log file can then be processed by www traffic analyzers.

    AltLog                     clf:/var/log/pureftpd.log



    # Create an additional log file with transfers logged in a format optimized
    # for statistic reports.

    AltLog                     stats:/var/log/pureftpd.log



    # Create an additional log file with transfers logged in the standard W3C
    # format (compatible with most commercial log analyzers)

    AltLog                     w3c:/var/log/pureftpd.log



    # Disallow the CHMOD command. Users can't change perms of their files.

    NoChmod                     yes



    # Allow users to resume and upload files, but *NOT* to delete them.

    #KeepAllFiles                yes



    # Automatically create home directories if they are missing

    #CreateHomeDir               yes



    # Enable virtual quotas. The first number is the max number of files.
    # The second number is the max size of megabytes.
    # So 1000:10 limits every user to 1000 files and 10 Mb.

    #Quota                       1000:10



    # If your pure-ftpd has been compiled with standalone support, you can change
    # the location of the pid file. The default is /var/run/pure-ftpd.pid

    #PIDFile                     /var/run/pure-ftpd.pid



    # If your pure-ftpd has been compiled with pure-uploadscript support,
    # this will make pure-ftpd write info about new uploads to
    # /var/run/pure-ftpd.upload.pipe so pure-uploadscript can read it and
    # spawn a script to handle the upload.

    #CallUploadScript yes



    # This option is useful with servers where anonymous upload is
    # allowed. As /var/ftp is in /var, it save some space and protect
    # the log files. When the partition is more that X percent full,
    # new uploads are disallowed.

    MaxDiskUsage               80



    # Set to 'yes' if you don't want your users to rename files.

    #NoRename                  yes



    # Be 'customer proof' : workaround against common customer mistakes like
    # 'chmod 0 public_html', that are valid, but that could cause ignorant
    # customers to lock their files, and then keep your technical support busy
    # with silly issues. If you're sure all your users have some basic Unix
    # knowledge, this feature is useless. If you're a hosting service, enable it.

    CustomerProof              yes



    # Per-user concurrency limits. It will only work if the FTP server has
    # been compiled with --with-peruserlimits (and this is the case on
    # most binary distributions) .
    # The format is : <max sessions per user>:<max anonymous sessions>
    # For instance, 3:20 means that the same authenticated user can have 3 active
    # sessions max. And there are 20 anonymous sessions max.

    # PerUserLimits            3:20



    # When a file is uploaded and there is already a previous version of the file
    # with the same name, the old file will neither get removed nor truncated.
    # Upload will take place in a temporary file and once the upload is complete,
    # the switch to the new version will be atomic. For instance, when a large PHP
    # script is being uploaded, the web server will still serve the old version and
    # immediatly switch to the new one as soon as the full file will have been
    # transfered. This option is incompatible with virtual quotas.

    NoTruncate               yes



    # This option can accept three values :
    # 0 : disable SSL/TLS encryption layer (default).
    # 1 : accept both traditional and encrypted sessions.
    # 2 : refuse connections that don't use SSL/TLS security mechanisms,
    #     including anonymous sessions.
    # Do _not_ uncomment this blindly. Be sure that :
    # 1) Your server has been compiled with SSL/TLS support (--with-tls),
    # 2) A valid certificate is in place,
    # 3) Only compatible clients will log in.

    # TLS                      1



    # Listen only to IPv4 addresses in standalone mode (ie. disable IPv6)
    # By default, both IPv4 and IPv6 are enabled.

    # IPV4Only                 yes



    # Listen only to IPv6 addresses in standalone mode (ie. disable IPv4)
    # By default, both IPv4 and IPv6 are enabled.

    # IPV6Only                 yes

    # UTF-8 support for file names (RFC 2640)
    # Define charset of the server filesystem and optionnally the default charset
    # for remote clients if they don't use UTF-8.
    # Works only if pure-ftpd has been compiled with --with-rfc2640

    # FileSystemCharset   big5
    # ClientCharset      big5
poner el servicio


cp contrib/redhat.init /etc/init.d/pureftpd
chmod +x /etc/init.d/pureftpd[/code]

Y nada mas queda deciros que existe una version MAC en su web


SySop
Responder